N. B. Borkar, Dr. S S Deshmukh


Advanced materials are generally requires an exceptional joining techniques forsound joint quality. Any new material has always been considered as ahigh point in a research and development,particularly for material that has widespread applications. The joining processes like diffusion bonding are considered in this literature review, Though  these processes are competent of joining a variety of materials in the aerospace and other industrial applications. The effects of preheating on temperature distribution is studied and review is to blaze theprogress made in this area and to make remarkable submission for future work.


friction stir welding; temperature distribution; pin angle; preheating

Full Text:



R. Keivani1, B. Bagheri2 “Effects of pin angle preheating on temperature distribution during friction stir welding operation”, (2013) Trans.Nonferrous Met. Soc. China 232708−2713

Omid Ali Zargar,“The Preheating Influence on Welded Joint Mechanical Properties Prepared by Friction Stir Welding Aluminum Alloy H20-H20” Middle-East Journal of Scientific Research 15 (10): 1415-1419, 2013.

Chen C M, Kovacevic R. Finite element modeling of frictionstir welding—Thermal and thermo-mechanical analysis2003, IJMTM, 43:1319−1326.

Tang W, Guo X, “Heatinput and temperature distribution in friction stir welding” 1999

Materials Processing & Manufacturing Science, , 37: 163−172.

Z.W. Chen and S. Yazdanian,Friction Stir Lap Welding: material flow, jointstructure and strength, 2012. AUT University, Auckland,NZJMM, 55(2): 629-627.

Effects of Heat Treatment on Residual Stress and International Menasri, IREME, 20115(4): 658-663.

Ahmed Khalid Hussain, Moussa Zaoui, “Evaluation of parameter of friction stir welding for Mechanical Properties of the Welded Tubes, aluminum AA6351 alloy, 2010. 2(10): 5977-5984.

M. Merklein et.al “Laser assisted Friction Stir Welding of drawable steel-aluminium tailored hybrids”Manufacturing Technology – Egerlandstr. 11, 91052 Erlangen, Germany.

Achar D.R.G., Ruge“AluminiummitStahl besondersdurchSchweißen” (1980) 56, Heft 2: 147-149,Heft 3: 220-223, Heft 4: 291-293.

Radscheit R.R., Laserstrahlfügen von Joinability of aluminiumalloy and mild steel sheets by self piercing rivet, (2006) JMPT,(1996)Vol. 177, Issues 1-3 417-421.

Thomas M.W., Nicholas J., Needham J.C., Murch M.G., Temple-Smith P., Dawes C.J., Friction Stir Butt Welding, Oct. 1995,GB No.9125978.8, Dec 1991..US Patent No.5460317.


  • There are currently no refbacks.